Covestro Bayhydur VPLS 2150BA Hydrophilic IPDI polyisocyanate curing agent - 广州昊毅新材料科技股份有限公司

Bayhydur-waterborne PU curing agent

Covestro Bayhydur VPLS 2150BA Hydrophilic IPDI polyisocyanate curing agent

                                                       

 

type

Hydrophilically modified aliphatic polyisocyanates based on isophorone diisocyanate (IPDI)

form of supply

About 70% in butyl acetate

use

As co-reactant for waterborne resins, curing agent for chemical and weather resistant coatings

 

  Product Specifications  

characteristic

Numerical value

Units of measurement

method

NCO content

9.4±0.5

%

DIN EN ISO 11 909

Non-volatile content

70±2

%

DIN EN ISO 3251

Viscosity@23°C

500±200

mPa.s

DIN EN ISO 3219/A.3

Color value

≤60

 

DIN EN1557

Isocyanate monomer content

0.5

%

DIN 55 956

 

Other data* 

characteristic

Numerical value

Units of measurement

method

equivalent

about 447

 

 

Density, 20°C

about 1.06

g/cm3

DIN EN ISO 2811

Flash point

about 27

°C

DIN EN ISO 1523

 

Solubility / dilution
     Bayhydur® VP LS 2150 BA can be completely dissolved/diluted in compounds such as butyl glycol acetate and butyl diethylene glycol acetate or aromatic hydrocarbons without the addition of polar solvents such as esters, ketones and ether esters . The product can be diluted to a stable solution with a minimum solids content of 20%, for example with xylene, toluene or higher boiling aromatic compounds such as naphtha No. 100 solvent or a mixture of aromatic compounds. However, it is recommended to test the solution for storage stability. Aliphatic (gasoline) solvents cannot be added during dilution if the dilution is to be stored for a long time. However, Bayhydur® VP LS 2150 BA is compatible with aliphatic compounds and can be added to coatings containing aliphatic solvents. Polyurethane grade solvents should be used (less than 0.05 % water). The solvent cannot contain reactive groups such as hydroxyl or amine groups.

 

  compatibility
    In general, Bayhydur® VP LS 2150BA can be mixed with Desmodur®, Bayhydur® and Bayhydrol® products listed below. However, the entire formulation must be tested for compatibility (including solids content, co-solvent content, co-solvent type). Desmodur® N3300, N3600, Bayhydur® 3100, most Bayhydrol® products such as Bayhydrol® VP LS 2054, VP LS 2058, VP LS 2231, A 145, XP 2470 and XP 2469.

  Features/Applications  
   Within the Bayhydrol® product range, Bayhydur® VP LS 2150 is primarily used as a co-reactant for aqueous polyol binders. Due to its hydrophilic nature, Bayhydur® VP LS 2150 is easily emulsified in the aqueous phase. The addition of Bayhydur® VP LS 2150 BA improves the properties of waterborne two-pack polyurethane coatings such as chemical and solvent resistance.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信