NMP N-methylpyrrolidone Polar solvent - 广州昊毅新材料科技股份有限公司

Others

NMP N-methylpyrrolidone Polar solvent

                                                 

 

 Product introduction
     NMP is a highly efficient and selective solvent, with low toxicity, non-corrosiveness, high solubility, low viscosity, low volatility, good stability, and easy recovery.

 

 Typical parameters

Chroma

20APHA

density

1.027-1.03025/4℃)

content

99.9%

moisture

0.05%

Distillation range

95%198-208℃)

pH value

7-9

Isomers

100ppm

Refractive index

1.465-1.470

toxicity

LD50=7210mg/kg

      NMP is easy to store and transport due to its low vapor pressure and high flash point (95°C). However, it has strong hygroscopicity, and the NMP solution that dissolves pesticides has strong permeability to the skin, so care should be taken when using it.

The main purpose

【1】Used as an efficient solvent for polymerization
NMP has greater solubility to resin, and its solubility parameters are shown in the following table:

Resin name

Solubility %

Resin name

Solubility%

Acrylonitrile/PVC

>10

Polyamide

>10

Polyurethane rubber

10

Polymethylmethacrylate

>10

PVC

>10

PVP

>10

polycarbonate

10

Ethyl cellulose

25

Polyester film

>10

Polyacrylonitrile

24

Note: Solubility is the weight (g) of the resin dissolved in 100g of solvent.
The solubility parameter of NMP for most resins is about 11. Since the solubility is very similar, the compatibility is very good.

[2] Recovery of acetylene
【3】Aromatic extraction
[4] Recovery of butadiene and isoprene
[5] Refinement of lubricating oil
【6】Gas purification and tail gas recovery
【7】Used in medicine
【8】Detergents for industrial use Clean chemical equipment, blockages, attachments and coatings, clean precision instruments, etc. It can also be used to produce battery chemicals.

 

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信