BYK DISPERBYK 182 Wetting and dispersing additive - 广州昊毅新材料科技股份有限公司

Wetting and dispersing agent

BYK DISPERBYK 182 Wetting and dispersing additive

  DISPERBYK-182  


Wetting and dispersing additive for waterborne and solventborne coating systems and printing inks. Available in all pigments from non-polar to aqueous systems
concentrate.

  chemical components  


High Molecular Weight Block Copolymer Solutions Containing Pigment Affinity Groups
  Typical materialized data  

The data given on this data sheet are only typical values, not the technical specifications of the product.

 

Amine value 13 mg KOH/g
Density (20 °C) 1.03 g/ml
Non-volatile matter (20 min., 150 °C) 43 %
Solvent Propylene Glycol Methyl Ether Acetate/Dipropylene Glycol Methyl Ether/Butyl Acetate 7/4/4
Flash point 38 °C

 

   special reminder


The surface treatment of some organic pigments can adversely affect the performance of this additive. In this case, try the same type of untreated pigment.

  Application field


  paint industry  

Product Features and Benefits: DISPERBYK-182 deflocculates pigments through steric stabilization. Due to the small particle size of the deflocculated pigment, high gloss can be obtained, color strength can be improved, and transparency or hiding power can be improved. Due to the reduction in viscosity, flow properties are improved and pigment levels can be increased.


  Recommended use

DISPERBYK-182 has a wide range of applications and is suitable for both solvent-borne and water-borne systems. It can be used alone or with DISPERBYK-108 for production comparison
Economical solvent-based pigment concentrates.

 

  Recommended dosage

Auxiliary dosage (as purchased) based on pigment:

Inorganic Pigment 15-20 %
Titanium dioxide 4-5 %
Organic Pigments 30-60 %
Carbon black 30-60 %

 

The above recommended dosage is for reference, and the optimum dosage needs to be determined through a series of tests.


  Joining method and processing guidance


For optimum performance, additives must be added to the millbase before the pigment.
Premix the resin and solvent components of the millbase, then slowly add DISPERBYK-182 with agitation. Add pigments only after the additives are completely dispersed.

  Printing ink

Product Features and Benefits: DISPERBYK-182 deflocculates pigments through steric stabilization. Due to the small particle size of the deflocculated pigment, high gloss can be obtained, color strength can be improved, and transparency or hiding power can be improved. Due to the reduction in viscosity, flow properties are improved and pigment levels can be increased.


  Recommended use

DISPERBYK-182 has a wide range of applications and is suitable for both solvent-borne and water-borne systems. It can be used alone or in combination with DISPERBYK-108 for the production of relatively economical solventborne pigment concentrates.

 

Recommended dosage

Auxiliary dosage (as purchased) based on pigment:

Titanium dioxide 2.5-5 %
Organic Pigments 7-13 %
Carbon black 7-13 %

 

The addition amount is for reference, and the optimum addition amount needs to be determined through a series of experiments.


  Joining method and processing guidance

For optimum performance, additives must be added to the millbase before the pigment. Pre-mix the resin and solvent components in the millbase, then slowly add the adjuvant while stirring. Add pigments only after the additives are completely dispersed.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信