type
Solvent-based polyurethane glue
application
For composite bonding of polyester, non-woven fabric, felt, sponge, foam, XPE, etc.
Main features
Good adhesion to substrates with low surface polarity
It has strong initial viscosity, high bonding strength after curing, and good temperature resistance
Water resistant.
Product Specifications
physical property |
physical property |
Exterior |
Light yellow transparent to translucent uniform viscous liquid |
Solid content (%) |
>35 |
Viscosity (mPa.s/25℃) |
100-400 |
Operation process and advice
Gluing method: spraying;
It is suitable to bond the adhered material within 5 minutes after spraying the glue
Instructions for use
Gluing and bonding: spray the glue evenly on the workpiece, glue on one or both sides, air it (proper airing can improve the initial viscosity), and press it with non-woven fabrics and other materials (the hot pressing will cure faster ) can be set; the amount of glue should be moderate to prevent quality defects such as poor bonding strength or excessive glue amount due to too little glue. The basic curing time is 24 hours, and the performance test is recommended to be carried out after 48 hours .
store
It should be sealed and stored in a cool and dry place indoors. The storage environment temperature is 5-35 °C, and at the same time, avoid moisture absorption and deterioration. The container should be covered in time when not in use. The shelf life after opening is three months.
Material Safety
This product contains organic solvents and is flammable; smoking is strictly prohibited in the workplace, good ventilation is maintained, and personal protective equipment is worn during operation.
扫一扫添加微信