Water-based mobile phone cover white ink, bright and high hardness, halogen-free - 广州昊毅新材料科技股份有限公司

Ink Varnish

Water-based mobile phone cover white ink, bright and high hardness, halogen-free

 Features  

The ink layer is bright, the ink is fine and uniform, the fluidity is good, the fineness is uniform, the meshing and leveling are good, the cured coating has excellent adhesion, good light transmittance, and the coating film has high hardness and good Water resistance, weather resistance, oil resistance, solvent resistance, chemical resistance and other solvents.

Uses: It is suitable for touch screens of many electronic products, such as mobile phones, tablet computers, navigators, notebook mice, etc. using glass and tempered glass materials, and also suitable for some reinforced materials, with good coverage, good chroma, and excellent printing adaptability. , for halogen-free products.

  technical parameter

adhesion

Libai grid knife is 1mm*1mm*100 grids, 3M tape is pulled 5 times, no falling off

fineness

With scraper fineness meter, scraper measurement ≤6um

hardness

With a Mitsubishi pencil at an angle of 45 degrees, the force is 500 grams for 3 consecutive measurements, no obvious traces, ≥3H

Pouring resistance

Immerse in 100°C deionized water for 2 hours. No foaming, no wrinkling, 100 grid test OK

Acid resistance

Immerse in 5% dilute sulfuric acid solution for 24 hours (25°C). No foaming, no wrinkling, 100 grid test OK

Alkali resistance

Immerse in 5% NaOH solution for 24 hours (25°C). No foaming, no wrinkling, 100 grid test OK

Solvent resistance

A cotton flannel cloth dipped in analytically pure butanone was coated with a 1kg weight and rubbed back and forth for 100 times. No fading, no fading

 


  Reference recipe  

ink

SF-1801B

Albic

WH-1940

SF-2598

AF-5157

Coupling agent (extra)

percentage

43.5

40

6

8

2.5

4

Albic

SF-1801B

R209

R972

AF-1803

White water proof

 

percentage

30

59

1

2

8

 



  Construction points 
Pre-construction treatment: ensure the cleanliness of the glass surface and no oil stains.
Construction method: mesh 350~420 mesh screen, screen printing.
Drying time: Bake at 140-190 degrees for 30 minutes.
Dilution ratio: 5-10% (water).

Storage: Store in a cool place in the warehouse and seal it after use.

Disclaimer: The information listed in this document is obtained by testing and is for reference only, not for guarantee purposes. Please confirm the test before use, and formulate appropriate production process and operation test to ensure the best and stable quality of the product.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信