Purpose 
      It is suitable for ITO glass such as mobile phones, MIDs, tablet computers, etc.

Features
The ink layer is bright, the ink is fine and uniform, the fluidity is good, the fineness is uniform, and the leveling property is good. The cured coating has excellent adhesion, good light transmittance, and the coating film has high hardness and good water resistance. properties, weather resistance, oil resistance, solvent resistance, chemical resistance and other solvents.

  technical parameter

  Reference recipe

Construction points
 

Pre-construction treatment: according to the production requirements of ITO sensor to ensure the cleanliness of the ITO glass surface.
Construction method: 200~250 mesh screen, screen printing.
Drying time: Bake at 140-150 degrees for 30 minutes.
Dilution ratio: 5-10% (high boiling point solvent).

Storage: Store in a cool place in the warehouse and seal it after use.

Disclaimer: The information listed in this document is obtained by testing and is for reference only, not for guarantee purposes. Please confirm the test before use, and formulate appropriate production process and operation test to ensure the best and stable quality of the product.