PF-1030M Water-based Matte Wear-Resistant Varnish - 广州昊毅新材料科技股份有限公司

Ink Varnish

PF-1030M Water-based Matte Wear-Resistant Varnish

product description
       
This product is a high performance aliphatic waterborne polyurethane dispersion and crosslinking reaction two-component waterborne matte coating, suitable for the protection and decoration of various paper, film, plastic and other substrates, with good chemical resistance and toughness, plasticizer migration resistance, short drying time, excellent water resistance, excellent abrasion resistance.
Printing glazing can enhance the light resistance of the ink, increase the heat and moisture resistance of the ink layer, and play the role of protecting the imprint, beautifying the product, and replacing the film. Compared with lamination, printing glazing is simple in process and cost-effective. It can be full-plate glazing or partial glazing, and it meets the requirements of environmental protection regulations.

Product parameters

project

unit

Numerical value

Appearance (25℃

-

Milky white liquid

Active ingredients

%

30±3

PH

-

8.0±0.5

proportion

g/cm³

1.050

Viscosity

s

50-120

 

application process

●Coating method: screen printing, spraying, blade coating, roller coating
Drying conditions: self-drying at room temperature for 7 days or 80-90℃/2 hours drying
●Construction process: spraying example
● Stir the varnish evenly, and weigh it according to the ratio of paint: curing agent: water = 100 : (1-3) : (10-20). Mix the well-measured varnish evenly, test the viscosity for 12-17s, leave it for 10 minutes, and then spray it for use.

paint film performance

project

Testing method

unit

Control indicators

luster

60°

%

10

adhesion

百格

1

Elongation at break

 

%

700

flexibility

 

mm

<1

Wear test

Abrasion Tester

Second-rate

1000

substrate

Paper, spray construction film thickness 5-10μm

 

  Precautions
       Please prepare and use the varnish now, do not leave it overnight. Unused varnish should not be returned to the original paint bucket. Please seal tightly after opening and use up as soon as possible. Under the condition of not higher than 25℃, the original product can be stored stably for 180 days, the minimum storage temperature: 5℃. Do not apply below 5°C.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信