类型 自清洁液体涂料
application
Used for surface coating protection of various plastic or metal substrates
Main features
- Excellent dryness
- Good adhesion to various substrate surfaces
- Excellent scratch, stain, water and chemical resistance
- Fast curing from room temperature to low temperature, good flexibility.
- High gloss, excellent leveling.
Product performance parameters
nature |
Numerical value |
Exterior |
Colorless to light yellow transparent liquid |
Density (23℃) |
1.0-1.11g/cm³ |
Viscosity (23℃) |
1-50mPa.s |
Flash-off time (23°C, 60% humidity) |
5-15min |
Curing properties
Typical curing temperature |
room temperature |
80℃ |
160℃ |
Typical cure time |
4h |
30-45min |
10min |
coating curing time |
168h |
168h |
168h |
Substrate processing
The surface of the substrate must be clean, dust-free, oil-free, pollution-free and moisture-free
construction
Dip coating: Fully immerse the workpiece to be coated in the liquid paint for 10 seconds, slowly lift the liquid surface, use a non-woven fabric to absorb the droplets at the bottom of the workpiece to ensure a uniform coating film, and flash dry at room temperature for 5-10 minutes.
Spraying: Clean the surface of the workpiece to be coated, and spray with an air spray gun: the recommended diameter of the equipment is 1.2-2.0mm; the spraying pressure is 0.1-1.0Bar; the spraying fan width: 15-45°; the paint flow rate is 0.5-1.5 circle
Roller coating: direct roller coating construction, the thickness of the coating film can be 5-8μm
Effective time
Use within 6 hours after opening the can
Recommended process parameters
Recommended film thickness |
≤8.0μm (dry film) |
Recommended Baking Conditions |
80℃,30-60minutes |
Recommended construction ambient temperature |
10-35℃ |
Recommended construction environment humidity |
40-70% |
Recommended construction environment wind speed |
0.3-0.5m/s |
Recommended curing time |
23℃, 60% humidity, 168h |
Equipment cleaning
Rinse with absolute ethanol first, then use special cleaning agent for cleaning and maintenance
storage and transportation
The product should be stored in a cool, dry place away from heat and ignition sources, and protected from freezing during storage and transportation. The shortest storage period at 5-35°C is 6 months, and re-testing is required after the expiration date. This product is sensitive to moisture, please use it as soon as possible after opening the cap.
扫一扫添加微信