Product Introduction
Desmodur Z 2589 is a micronized colorless to slightly yellowish resin based on isophorone diisocyanate (IPDI)
Specification
characteristic |
Numerical value |
Units of measurement |
method |
NCO content |
17 ± 0.7 |
% |
M105-ISO 11909 |
Other data*
characteristic |
Numerical value |
Units of measurement |
method |
Hazen Color Value (50% MPA/Xylene 1:1) |
≤ 100 |
|
DIN EN 1557 |
Tg |
about 65 |
°C |
ISO 11357 |
Test weight |
about 0.175 |
kg/L |
DIN ISO 697 |
IPDI monomer content |
< 0.5 |
% |
DIN EN ISO 10283 |
Particle size (volume distribution D50) |
about 1.6 |
µm |
|
*This data is general information and is not part of the product specification.
Features/Applications .
Appropriately deactivated DesmodurZ 2589 can be used in combination with Dispercoll U as a curing one-component latent reactive polyurethane dispersion adhesive for latent reactive adhesive layers or for latent reactive film formulations. DesmodurZ 2589 is water soluble and can be diluted in aprotic polar solvents such as esters such as butyl acetate, methyl ethyl ketone, ketone methoxy propyl acetate and aromatic hydrocarbons. Compatibility with commercial solvents is generally good, but the respective storage stability needs to be tested. Polyurethane grade solvents should be used (less than 0.05% water, no reactive groups such as hydroxyl or amino groups). DesmodurZ 2589 can also be used as a curing agent for two-component solvent-based adhesives. DesmodurZ 2589 is currently compliant with global regulations for food adhesives. Regulations on food migration thresholds at EU level are currently under preparation. Up-to-date statements on relevant boundary conditions (SML* and DWL** values) are available upon request.
*SML=Specific Migration Limit
**DWL=Drinking Water Limit
store .
- Store in original Covestro airtight containers.
- Recommended storage temperature: 10-25℃.
- Avoid direct sunlight, moisture, heat and foreign substances.
General Information: This product is moisture sensitive and storage at higher temperatures can cause product caking which is irreversible by mechanical means.
storage time
Covestro declares that the product complies with the above "specification or characteristic values" for a period of 9 months from the date of shipment stated on the shipping document, provided that the product has been stored in full compliance with the requirements in the "Storage" clause above and handled properly Specifications or characteristic values stated in the Terms (as applicable). Exceeding the above 9-month period does not mean that a product no longer meets the specifications or the values set in the characteristic values. However, Covestro recommends that products older than 9 months from the date of shipment be tested before use to confirm that they still meet the specifications or set values in the characteristic values. Covestro makes no commitments for products older than 9 months from the date of shipment and accepts no responsibility or liability for non-conformance to specifications or set values in characteristic values.
Additional information
This product is mainly used as a curing agent in coatings or adhesives. Handling of coatings or adhesives containing reactive polyisocyanates and residual monomer IPDI requires appropriate protection as mentioned in the safety data sheets. Therefore, these products may only be used in industrial or commercial applications. They are not suitable for homework (DIY) applications.
Package
8kg net in a carton
扫一扫添加微信