SK saturated polyester resin

SKYBON ES-410 Saturated Polyester Resin

Specification

parameter	unit	value
Exterior	—	transparent particles
molecular weight	—	16000
Viscosity	dl/g	0.50
glass transition temperature	℃	47
Softening Point	℃	120
Acid value	KOH mg/g	less than 3
Hydroxyl value	KOH mg/g	4～8
Tensile Strength	kg/cm3	470

Application
white cotin in the printed iron
Coil Primer
glue

Features
Suitable for deep drawing
Good adhesion to iron, aluminium and tinplate
Flexibility and Leveling

dissolve
1. Add all the solvent to the reactor.
2. While stirring, put ES-410 solids into the reactor.
3. After putting in all the components, raise the temperature of the reactor to 90-100 degrees, stir for 2 hours, the maximum pressure in the reactor: 2kg/cm2
4. Turn off the heating device and continuously stir the mixture for one and a half hours, allowing the reactor to cool naturally.
5. Stop stirring, when the solution is filtered, put it into a 200kg bucket

solvent used
MEK, toluene, acetone, SOVESSO, cyclohexanone, cellulose acetate, isophorone, DBE

Package
25kg/bag, 14MT/FCL