BYK 019 Silicone defoamer - 广州昊毅新材料科技股份有限公司

Defoamers

BYK 019 Silicone defoamer

  BYK-019  

Silicone defoamer recommended for waterborne pigment concentrates for coatings, printing inks and overcoat varnishes. It prevents foaming during grinding and provides long-term and shear stability. Particularly suitable for resin-free grinding.

 

  chemical components  

Polyether-modified polydimethylsiloxane solution

 

  Typical materialized data  

 chemical components

Polyether-modified polydimethylsiloxane solution

 

  Typical materialized data

chemical components 

Polyether-modified polydimethylsiloxane solution

 Typical materialized data

Density (20ºC)

0.98g/ml

Non-volatile matter (60 min., 105 °C)

60%

solvent

Dipropylene glycol monomethyl ether

Flash point

78 °C

 

  Application field

 (1) Coating industry  

a. Product features and advantages

BYK-019 is particularly suitable for waterborne coating systems of polyurethane dispersions and polyurethane/acrylate composite dispersions as well as pigment concentrates. To reduce microbubbles, it is recommended to mix BYK-019 with BYK-024 in a ratio of 3:2.

b. Recommended dosage

0.1-1 % Auxiliary dosage (as purchased) is based on the total formulation.

 

c. Joining methods and processing instructions

Due to the high degree of incompatibility of the auxiliaries, the defoamer must be added under high shear to ensure good dispersion. Otherwise, system defects may be caused.

(2) Printing ink and overcoat varnish

a. Product features and advantages

BYK-019 is particularly suitable for waterborne finish varnishes based on acrylate dispersions, polyurethane dispersions and polyurethane/acrylate composite dispersions, as well as for defoaming of pigment concentrates. To reduce microfoam, a 3:2 ratio of BYK-019 to BYK-024 proved to be very effective in pigment concentrates.

b. Recommended use

The additive is particularly suitable for aqueous and UV systems.

c. Recommended dosage

0.1-1 % Auxiliary dosage (as purchased) is based on the total formulation.

d. Joining methods and processing instructions

Due to the high degree of incompatibility of the auxiliaries, the defoamer must be added under high shear to ensure good dispersion. Otherwise, it may cause system defects.
 

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信