Hot melt pressure sensitive adhesive DH-5001 is suitable for bonding and laminating of automotive interior parts - 广州昊毅新材料科技股份有限公司

Automotive interior adhesives

Hot melt pressure sensitive adhesive DH-5001 is suitable for bonding and laminating of automotive interior parts

                                                   

 

 Type:Hot melt pressure sensitive adhesive

  Uses  Suitable for bonding and lamination of automotive interior parts, including carpets, seat backs, spare tire covers, sunroof frames, ceiling accessories, etc.

 Performance:

①Good heat resistance

②Good adhesion to various substrates, including tinplate, ASS, PP and other materials

③No irritating smell, environmental protection

  technical parameter

surface color

light yellow solid

Softening Point (Ring and Ball Method)

about 134℃

Brookfield Viscosity (180℃)

35000mPa.s

solid content

100%

Operating temperature

175-195

 

 

Operation Tips

①Before gluing, the surface of the substrate must be dry, clean and free of dust and oil;

② Glue strips, spray or roll coating as needed;

③ The higher the melting temperature, the lower the viscosity and the longer the opening time, but the maximum construction temperature should not exceed 210℃;

④For winter construction, pay attention to the temperature of the base material. The temperature of the base material should not be lower than 15℃ when gluing, otherwise the bonding test should be carried out first.

Packaging and Storage

Packing: 12kg/carton

Storage: The product can be stored for 24 months at 5-35℃

data foundation

All data stated in the product data sheet were obtained in laboratory tests. Actual measured data may vary due to circumstances beyond our control.

  important  

For information and advice on transportation, handling, storage and chemical handling, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety-related data.

  Legal Notices  

When the product is correctly stored, handled and constructed under normal conditions, the information provided by Haoyi New Materials and the construction and treatment suggestions given according to the actual situation are based on the good knowledge and experience of Haoyi New Materials. confidence. In practical applications, due to the differences in the materials, substrates and actual site conditions used, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Materials Co. FITNESS FOR A PARTICULAR PURPOSE MAKES NO WARRANTY AND ASSUMES ANY LIABILITY. The user of the product should test the suitability of the product for its application and purpose. Haoyi New Material Co., Ltd. reserves the right to change the nature of its products. The third party's right to use should be respected. All orders are subject to the current sales and shipping terms. Users should refer to the latest version of the relevant product manuals, which Haoyi New Materials Company can provide according to their needs.

 

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信