Hot Melt Polyurethane Adhesive DH-8001 is suitable for laminating and bonding of automotive interiors and home appliance assembly - 广州昊毅新材料科技股份有限公司

Automotive interior adhesives

Hot Melt Polyurethane Adhesive DH-8001 is suitable for laminating and bonding of automotive interiors and home appliance assembly

                                               

 

 Type  :Hot Melt Polyurethane Adhesive

  Uses

Suitable for lamination of automotive interior parts such as door panels, armrests, seat back panels, etc.

Suitable for bonding car ceilings, door panels, carpets, spare tire covers, etc.

Assembly of home appliances, furniture, doors and windows, handicrafts, etc.

  Performance:

① Fast curing and high strength

②No odor, no solvent volatilization

③Good adhesion to the substrate

technical parameter

Exterior

Off-white solid

Curing method

moisture curing

solid content

100%

density

About 1.1g/ml

Viscosity (130℃)

About 30000mpa.s

Activation temperature (℃)

60

Opening hours

about 30s

Construction temperature

130-170

Tensile strength (Mpa) (DIN53504/ISO37)

about 15

Elongation at break (%) (DIN53504/ISO37)

about 400

Operating temperature

-40-110℃(long term)

 

 

 Construction Conditions

1. Surface treatment: the bonding surface should be clean, dry, free from grease, oil and dust;

2. Glue: use hot melt glue pump or glue gun to glue

  Notice  

1. High temperature during use to avoid burns;

2. If the use process is interrupted, the heating temperature needs to be lowered to below 100 degrees;

3. After use or when replacing the glue, pay attention to avoid the entry of moisture and block the glue dispensing equipment.

Packaging and Storage

Packaging: 20L/small barrel, 200L/large barrel

Storage: Unopened product can be stored for 9 months at 5-30℃, avoid high temperature.

data foundation

All data stated in the product data sheet were obtained in laboratory tests. Actual measured data may vary due to circumstances beyond our control.

  important  

For information and advice on transportation, handling, storage and chemical handling, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety-related data.

  Legal Notices  

When the product is correctly stored, handled and constructed under normal conditions, the information provided by Haoyi New Materials and the construction and treatment suggestions given according to the actual situation are based on the good knowledge and experience of Haoyi New Materials. confidence. In practical applications, due to the differences in the materials, substrates and actual site conditions used, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Materials Co. FITNESS FOR A PARTICULAR PURPOSE MAKES NO WARRANTY AND ASSUMES ANY LIABILITY. The user of the product should test the suitability of the product for its application and purpose. Haoyi New Material Co., Ltd. reserves the right to change the nature of its products. The third party's right to use should be respected. All orders are subject to the current sales and shipping terms. Users should refer to the latest version of the relevant product manuals, which Haoyi New Materials Company can provide according to their needs.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信