Type acrylic-silicon hybrid flow promoter
Supply form 100%
Product test data
Measured value per batch
Color/Appearance |
VLN250 |
|
color |
Colorless or slightly yellow |
|
Exterior |
clear |
|
Dynamic viscosity |
DIN EN ISO 3219 |
10000-30000 mPa·s |
Hazen |
DIN EN ISO 6271-1 |
<200 |
Non-volatile matter content |
DIN 55671 |
>96.0% |
Refractive index (25℃) |
DIN 53491 |
1.4460-1.4690 |
Non-continuous measured values:
Density (20℃) |
DIN EN ISO 2811-2 |
1.07 g/cm3 |
Flash point (CCCFP) |
ASTM D6450 |
>95 ℃ |
Special properties and use
Modaflow Lambda is a unique acrylic-silicon polymer flow enhancer that combines the individual properties of acrylic leveling agent and silicone leveling agent.
High compatibility in clearcoats and topcoats in all non-aqueous systems and the following better surface properties:
- gloss
- Vivid DOI
- clear and bright
- Anti-orange peel effect
Effective at low addition levels and easy to mix with solventborne resins including high and very high solids. Moreover, the product can also be used in solvent-free and radiation-curing systems. Modaflow Lambda has shown a better balance of compatibility and effectiveness than traditional silicone or acrylic levelers in automotive OEM, automotive refinish and industrial paints.
Due to the high hydroxyl group content of Modaflow Lambda, this product can be crosslinked in baking and 2K systems without the problem of decreased interlayer adhesion. To ensure recoatability in multi-coat systems, the bake temperature must not exceed 130°C.
The recommended initial dosage is 0.05% of the total formula, and the suitable dosage range is 0.05%-0.3%. In some cases, the addition was increased to 0.5%.
store
Packed in the original container, the storage stability at a temperature below 25°C can reach at least 1460 days.
扫一扫添加微信