Other additives

allnex Modaflow 9200 resin-based leveling agent

product information

type	Acrylic flow modifier, no silicone added
form of supply	100%

development information
This product is for trial use only. Deviations that may occur during transfer to commercial scale manufacturing are possible and do not constitute any material defects.

Tentative product data

Each batch is measured:

Color/Appearance	VLN250
color	cless-syel
Exterior	clear
non-volatile substances	VLN 256	≥ 96.5% (metal 75 mm; 1 g; 2 hours; 105 °C)
Dynamic Viscosity (Brookfield)	DIN EN ISO 2555	4000 - 14000 mPa.s (4; 20; 25 °C)
Refractive Index (25°C)	DIN 53491	1.4650 - 1.4670
Color scale (Hazen)	DIN ISO 6271	≤150

Non-continuous determination:

Density (25°C)

DIN EN ISO 2811-2

1.020 - 1.040 g/cm³

Special properties and uses
Modaflow 9200 is a new low viscosity flow modifier specially developed for high performance solvent based automotive and industrial coatings, especially in clear topcoat applications, it provides high gloss, low orange peel and excellent DOI (Definition of Image) images.
Using Modaflow 9200 can significantly improve coating quality as follows:
- Improve flow and leveling
- Reduce pinholes, fisheyes, craters and orange peel
- Improved substrate wetting
- Improve or maintain high gloss
- Improve or maintain substrate and interlayer adhesion
- Facilitates pigment dispersion
Addition: 0.1 - 2.0 % solid resin

storage
The storage stability of Modaflow 9200 in its original container is at least 12 months at 25°C.