Product Features and Benefits
• low viscosity
• Low surface tension
• Gives good spread and wetting
• High flash point (> 100°C/> 212°F)
• soluble in water
application
• Improves wetting on difficult-to-coat substrates with waterborne coatings.
• Improves the wettability of water-soluble flexographic and gravure inks on high gloss packaging materials such as polyethylene, polypropylene and polyethylene paraxylate.
• Reduce the amount of organic co-solvents used to improve wettability and improve print quality.
Typical physical properties
(The following values are not available for specification)
parameter |
unit |
Numerical value |
Exterior |
Translucent amber liquid |
|
Viscosity@25°C |
mm2/s |
40 |
melting point |
°C |
-33 |
closed cup flash point |
°C |
>100 |
Active ingredient content |
w/w% |
100 |
Cloud point (1.0% water) |
°C |
<10 |
Application method
In ink formulations, DOWSIL™ 67 Additive is typically added in the range of 0.1 %–1.0 wt %.
The surface fluidity of DOWSIL 67 Additive can be expressed by comparing the equilibrium and kinetic surface tensions of aqueous solutions (as shown in Table 1).
Table 1: Equilibrium and Kinetic Surface Tension of Aqueous Solutions
% Equilibrium Surface Tension in Water (mN/m) Dynamic Surface Tension (mN/m)
DOWSIL 67 Additive
0.01 22.7 54.0
0.1 21.1 34.0
1.0 20.7 23.1
Operation Precautions
This material does not contain product safety information required for safe use. Before use, read the product and its Safety Data Sheet and container label for information on safe use, physical and health hazards. Safety Data Sheets are available on the Dow website at WWW.CONSUMER.DOW.COM.CN or from a Dow sales application engineer or distributor, or by calling the Dow Global Contact.
Storage and expiration date
Store unopened below 30°C (86°F), the product has a shelf life of 24 months from the date of manufacture.
usage restrictions
This product has not been tested or stated to be suitable for medical or pharmaceutical use.
Health and Environmental Information
In order to help customers use products safely, Dow has established strict product service organizations in various regions, and has a group of experts in product safety and regulatory compliance to serve customers.
For more information, please visit our official website at consumer.dow.com.cn, or consult your local Dow representative.
Table 2: Effectiveness of DOWSIL 67 Additive as Wetting Agent
Droplets with polyethylene wetting radius of 0.2 ml
%水中 DOWSIL 67 Additive
0 0.30
0.01 0.76
0.1 1.65
1.0 1.90
(Polyethylene surface energy is 22mN/m)
扫一扫添加微信