Product introduction
HARDLEN F-2P has developed a new maleic acid modified chlorinated polyolefin for tackifier at TOYOBO.
HARDLEN F-2P is used as a tinted primer on PP/EPDM bumpers or TSOP without any pretreatment such as plasma, flame and solvent surface cleaning.
property parameter
polymer |
Modified Chlorinated Polyolefin and Maleic Anhydride |
Exterior |
yellow-brown particles |
Polymer chlorine content |
20 wt% |
Viscosity |
30~100mPa·s (solid content 20wt% at 25℃) |
product features
1. Excellent adhesion to PP/EPDM bumpers or TSOP without solvent surface treatment such as 1,1,1-trichloroethane.
2. Excellent intercoat adhesion between primer and primer. (especially in the case of polyurethane coatings)
3. Water resistance and gasoline resistance are excellent after top coating. (especially in the case of polyurethane coatings)
4. Partially good compatibility with other resins.
5. Soluble in suitable solvents such as toluene or Solvesso 100.
store
Please keep F-2P dry below 5 degrees Celsius;
Please keep the F-2P away from the direct rays of the sun;
Please use up the bag after opening.
扫一扫添加微信