TPO photoinitiator 2,4,6-trimethylbenzoyl-diphenylphosphine oxide - 广州昊毅新材料科技股份有限公司

Photoinitiators

TPO photoinitiator 2,4,6-trimethylbenzoyl-diphenylphosphine oxide

                                                       

 

 Product introduction 
       TPO is an efficient free radical type I UV curing initiator. Due to its broad UV absorption spectrum, it is especially suitable for curing of low yellowing systems, colored especially white systems and thick film layers. Used in coatings and surface paints containing titanium oxide, it has extremely low yellowing, so it has a very wide range of application values in surface coatings of optical fibers, optical discs, credit cards, electronic circuit boards, etc.

  Typical value

molecular formula

C22H21PO2

molecular weight

348.4

Exterior

Pale yellow powdery solid

purity

≥99.0%

melting point

87~93℃

Volatile

≤0.3%

Acid value

≤1mg KOH/g

Absorption wavelength

380nm

 

 

Typical characteristics

典型应用

typical application

Wide UV absorption range

Excellent absorption properties

Suitable for colored, especially white systems

very low yellowing

Excellent deep curing performance

·Silk printing ink

· Lithographic printing ink

·Flexo printing ink

·electronic product

·Wood coating

 

  Recommended dosage  
      It is recommended to add 1-3% in the product.

 

 Storage conditions
       This product should be stored in a sealed condition away from light, and stored in a low temperature and dry place.

  Safety Instructions  

1: Unified chemical resistant gloves
2: Avoid inhalation
3: Avoid direct contact with eyes, skin and clothing
4: In case of eye contact, please wash with plenty of water.

 

  Package
       20KG paper drum or carton

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信