Covestro Desmodur BL 3575/1 MPA/SN Thermally activated HDI curing agent Low thermal yellowing - 广州昊毅新材料科技股份有限公司

Desmodur-HDI based curing agent

Covestro Desmodur BL 3575/1 MPA/SN Thermally activated HDI curing agent Low thermal yellowing

                                                             

 

 

type

Blocked aliphatic polyisocyanates based on HDI

form of supply

About 75% Solvent Naphtha 100 / 1-Methoxypropyl Acetate-2 (17:8)

use

Use with Desmophen® grades to formulate lightfast one-pack stoving polyurethane coatings

 

  Specification  

characteristic

Numerical value

Units of measurement

Units of measurement

Non-volatile components (0.2 g/60 min/ 80°C)

75±2

DIN EN ISO 3251

Viscosity@23°C

3,600±1,000

mPa·s

DIN EN ISO 3219 / A.3

Hazen color value

≤100

 

DIN EN 1557

 

  other data*

characteristic

Numerical value

Units of measurement

method

equivalent weight

about 400

 

 

Blocked NCO content

about 10.5

 

Density@20°C

about 1.1

g/ml

DIN EN ISO 2811

Flash point

about 53

°C

DIN EN ISO 13 736

*These values provide general information and are not part of the product specification.

  Solubility / dilution  
     Desmodur® BL 3575/1 MPA/SN can be diluted with esters, ketones and aromatic hydrocarbons such as: ethyl acetate, butyl acetate, methoxypropyl acetate, acetone, methyl isobutyl ketone, toluene, xylene, Solvent Naphtha 100, 150 and mixtures thereof.
Generally speaking, it has good compatibility with the listed solvents. However, the storage stability of the solution formed must be tested. Aliphatic hydrocarbons are not suitable as solvents. 
Desmodur® BL 3575/1 MPA/SN should not be diluted below 40% solids and solvent naphtha must not be below 60%. Long-term storage of solutions with lower binder content may result in cloudiness and precipitation.

Compatibility
Considering equivalent crosslinking, Desmodur® BL 3575/1 MPA/SN is generally compatible with Desmophen® 651, 670, 680, 690, 800, 1300, VP LS 2971, VP LS 2388, VP LS 2107, RD 181, A 160 , A 165, A 265, A 365, A 450, A 565, A 575, A 665 and A 870 and Desmophen® T1665.
Combinations should always be tested for compatibility.

Properties/Applications
Desmodur® BL 3575/1 MPA/SN is combined with Desmophen® types to form light, weather, chemical and high heat resistant one-component polyurethane bake coating formulations.
Mainly used in automotive OEM and high-grade topcoat industrial coatings (can/coil coatings, etc.).
Compared to Desmodur® BL 3175 SN, Desmodur® BL 3575/1 MPA/SN allows approximately 10°C lower bake temperature without reducing solvent and chemical resistance.
Typical bake conditions without catalyst are, for example, the combination Desmophen® T1665:
160°C 20 minutes
or 170°C for 10 minutes
or 190°C for 5 minutes
The use of metal catalysts can significantly reduce the bake temperature.
For coil coating systems, Desmodur® BL 3575/1 MPA/SN achieves sufficient crosslinking without catalyst addition at temperatures above 232°C.

storage
- Store in the original, sealed Covestro container.
- Recommended storage temperature: 0-30°C.
- Resistant to moisture, heat and foreign objects.
General Information: Storage at higher temperatures can result in increased color and viscosity. Will cause storage to solidify at significantly lower temperatures. By simply heating the product, this curing is reversible without adversely affecting product quality.

storage time
Covestro declares that, within nine months of one day after shipment as specified in the shipping documents, the product will meet the specifications or values ​​specified in the "Specifications or Characteristic Data" section above, as applicable, provided that the product is in full compliance with the stated and The storage conditions referenced are in the "Storage" section above and are otherwise properly handled. Failure during the nine-month period does not necessarily mean that the product no longer meets the specifications or set values. However, prior to using the above product, Covestro It is recommended to test whether such products still exist in compliance with specifications or set values. Covestro does not make any representations about the product after the nine-month period has expired, and Covestro is not responsible or liable for the failure of the product within the nine After the month, the specification or setpoint period is met.

Labeling and statutory requirements
This product data sheet is only to be used with the latest version of the corresponding safety data sheet. Any updates to safety-related information, in accordance with statutory requirements, will only be reflected in the safety-related data sheets, copies of which will be revised and distributed. Related information to current classification and labelling, application and treatment methods More safety-related data sheets can be found in the currently effective safety data sheet.
 

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信