Epoxy

Evonik Original Air Chemicals American Gas Ancamine 2636 Epoxy Hardener

Product introduction
Ancamine 2636 is a modified aliphatic amine curing agent. Has a fast response speed. It cures well under harsh environmental conditions - low temperature (below 10°C) and high humidity. It can also be used as an accelerator for other curing agents.

Typical characteristics

Exterior	yellow liquid
Color (Garage)	5
Viscosity (25℃) cps	300
Amine value (mg KOH/g)	360
Specific Gravity@25°C	1.104
Flash point (°C)	138

advantage

1. Fast curing, fast hardness development
2. High strength and modulus
3. Outstanding low temperature curing performance (5OC)
4. Low oil surface
5. Good chemical resistance, such as organic acids, alkalis, etc.

application

1. Concrete Repair
2. Solvent-free or high-solid coatings
3. Adhesive
4. Tank interior or anti-corrosion coating
5. Accelerators for other curing agents

Typical Operating Characteristics

Proportion (PHR)	40
Mixing viscosity (25℃) cP s	2040
Gel time (150g 25℃) (min)	11
Film drying time
25℃（hr）	3
5℃ （hr）	11
Typical Cure Characteristics 25°C	7 days cure
Compressive strength MPa	110
Membrane compressive strength MPa	2600
Bending strength MPa	112
Film bending strength MPa	3750
Elongation strength MPa	70
Elongation strength MPa	1520
extend(%)	4.5
Hardness Shore D	82