Product introduction
XP 2458 is used as matrix resin in solvent-free moisture-curing one-component systems. By adjusting the process system, no air bubbles are generated during the curing process. This product is primarily used for one-component moisture-curing adhesives. Typical application areas include wood, plastic and metal adhesives. The adhesive properties of the product can be effectively enhanced by adding suitable fillers. XP 2458 can also be used in moisture-curing sealant and coating formulations.
Typical parameters
characteristic |
Numerical value |
Exterior |
Yellowish transparent liquid |
Viscosity@23 ℃, mPs |
35000 |
Specific Gravity@20℃, g/cm3 |
1.023 |
Mass@20℃, lb |
8.54 |
Flash point ℃ |
156 |
Minimum temperature flow point °C |
-6 |
Compatibility
XP 2458 is soluble in typical plasticizers and aromatic solvents.
store
This product should be stored in a cool, airtight container. An increase in storage temperature (above 30°C) will increase the viscosity of the product. The maximum storage temperature for this product is 50°C and the shelf life in an airtight container is six months from the date of receipt.
扫一扫添加微信