Product introduction
Desmodos 0129 M is a mixture of 4,4'-, 2,4' and 2,2'-.diphenylmethane diisocyanates. Among them, the relative content of 2,4'-isomer is higher. This product is mainly used in the production of polyurethane products.
sampling
Prevent product from coming into contact with water vapour during sampling
Specifications
Property |
Value |
Unit of measurement |
Method |
2,2'-MDI content |
≤0.8 |
% by wt. |
AM 2012 |
2,4'-MDI content |
55 ± 5 |
% by wt. |
AM 2012 |
Hydrolyzed chlorine |
≤ 50 |
ppm |
AM 2002 |
Typical properties
Property |
Value |
Unit of measurement |
Method |
Purity (molecular weight 250) |
≥99.5 |
% by wt. |
2011-0248603-94 |
NCO content (theoretical value) |
33.6 |
% by wt. |
|
Phenyl isocyanate content |
≤ 10 |
ppm |
AM 2014 |
solidification range |
12-20 |
℃ |
|
Viscosity (25℃) |
12 ± 2 |
mPa . s |
AM 2016 |
Density (25℃) |
1.21 |
g/cm³ |
DIN 51757 |
Package
barrels, storage tanks, etc.
Storage conditions
Recommended storage temperature: 20-30℃
Shelf life
6 months (waterproof, airtight preservation)
Action suggestion
Like all isocyanates, Desmodur TP. PU 0129 M is very sensitive to water and reacts with water to produce insoluble urea and carbon dioxide. In a closed container, the carbon dioxide produced can cause a dangerous rise in container pressure.
Storing raw materials above 30°C will accelerate dimer formation and shorten product shelf life.
Storing Desmodur TP. PU 0129 M in a crystalline or partially crystalline state will also relatively accelerate dimer formation, which should also be avoided. If not many dimers are produced, the crystallized product can still be used by means of rapid melting. But pay attention to the melting temperature between 60 to 70 ℃. The temperature at which the product is heated cannot exceed 70°C. Once melting is complete, the product should be homogenized and cooled down to the recommended temperature for storage. Since this treatment will inevitably produce more dimers, it is recommended to use up the product as soon as possible. If air enters, especially if the product is exposed to light for a long time, it will contaminate the product, turn yellow, etc.
扫一扫添加微信