Hydlub-01 is a hydrophilic lubricating coating product independently developed and produced by Haoyi New Materials, which is mainly composed of hydrophilic polymers. It is based on dip coating and heat curing process. Forms a uniform and firm coating. Hydlub-01 has a high affinity for water. Coating Hydlub-01 on the surface of the substrate can reduce the coefficient of friction. After immersing in water for a few seconds, it can produce a loach-like lubricating feel, which greatly reduces the guide wire/catheter and cavity. The friction between the channels enhances the pushability of the product during use, and reduces the patient's cavity tissue damage and discomfort.
Significantly reduces friction on a variety of substrate surfaces
Features:
Hydlub-01 thermal curing equipment threshold is low, a stable oven is enough. The operation is relatively simple, and the process parameters can adjust the window width. The coating is a pre-configured liquid, and does not require any additives when used, and the solution can be stored at room temperature for a long time. The product produced has excellent batch consistency.
Curing conditions: Bake at 50-70°C for 30min-60min (under some specific conditions, room temperature curing can also be achieved)
Thermal curing coatings do not require special equipment, and ordinary ovens can meet most requirements
Can be used for lubricating the inner cavity of products that cannot be handled by UV-cured coatings
Can be used to lubricate irregular product surfaces that cannot be handled by UV-cured coatings
Relatively low cost of UV coating
More about this source textSource text required for additional translation information
Send feedback
扫一扫添加微信