Evonik AEROSIL fumed silica rheology control additives 200, 300, 380, COK 84, R202, R208
The rheological properties of paints and coatings can be adjusted according to requirements using hydrophilic or hydrophobic AEROSIL® products. In almost all solvent-borne, water-based, and high-solids coatings, the addition level is 0.3–1.0% based on the total formulation. Incorporation of AEROSIL® particles into coatings often results in pseudoplasticity associated with thixotropic effects.
|
product |
water-based paint |
Solvent-Based Coatings |
radiation curing |
rheological control |
Scratch resistance |
|
AEROSIL® 200 |
recommend |
highly recommended |
highly recommended |
highly recommended |
Not recommended |
|
AEROSIL® 300 |
highly recommended |
highly recommended |
recommend |
highly recommended |
recommended |
|
AEROSIL® 380 |
recommend |
recommend |
recommend |
highly recommended |
Not recommended |
|
AEROSIL® COK 84 |
highly recommended |
recommend |
Not recommended |
highly recommended |
Not recommended |
|
AEROSIL® R 202 |
Not recommended |
highly recommended |
Not recommended |
highly recommended |
Not recommended |
|
AEROSIL® R 208 |
Not recommended |
highly recommended |
Not recommended |
highly recommended |
Not recommended |
- PREV：Evonik AEROSIL fumed silica rheology control additives R805, R812, R812S, R816, R972, R974
- NEXT：Evonik TEGO Rad Radiation Curing Additives 2010, 2100, 2200N, 2250, 2300, 2500, 2650, 2700, 2800
