product description
TEGO Foamex 825, strong defoaming, also suitable for polyurethane-acrylate adhesives, very suitable for use with TEGO Foamex 810
Application suggestion
Brush Application/Roller Application |
4 |
Brush Application/Roller Application |
3 |
Compressed air spray |
5 |
Letterpress/gravure printing |
2 |
Dip Coating, Flow Coating, Flow Coating |
5 |
ground bed |
3 |
Note: 0=Not applicable 5=Highly applicable
suitability
project |
Typical data |
waterborne |
Suitable for |
solvent type |
not applicable |
Two-component type 100% |
not applicable |
radiation curing |
not applicable |
clear paint |
Suitable for |
pigmented |
Suitable for |
added to
grinding section |
Generally suitable |
second half |
Suitable for |
Recommended dosage
Calculated according to the total formula based on the original product: 0.1-1.0%
Instructions for use
before use. Easy mixing with low shear
Can be added to the grinding section or the second half
It is recommended to add the original
The long-term effect of the defoamer is related to the formulation, so it should be tested in individual formulations (recommended at different temperatures)
recipe suggestion
Low-foaming Substrate Wetting Alternative: TEGO Foamax 4100
Stronger alternatives: TEGO Foamax 1488, TEGO Foamax 855. Best compatible alternatives: TEGO Foamax 822, TEGO Foamax 805
dilution
an be diluted with water
Storage stability after dilution may be limited
May not be diluted with organic solvents due to stability
chemical structure
Polyether siloxane copolymer emulsion with fumed silica
technical parameter
project |
Typical data |
Exterior |
white thixotropic liquid |
solid content |
Ca.26% |
solvent |
water |
suitability for food contact
Auxiliaries/monomers/solvents are listed in Table A of Swiss Decree 817.023.21, Annex 6
Detailed BfR and 10/2011 status consultation, available on request
Can be used in compliance with FDA regulations 21 CFR 175.105
storage security
When stored in the original unopened packaging, between +4 and +40°C, the shelf life of this product is at least 12 months from the date of manufacture.
Package
30kg plastic bucket
210kg plastic bucket
1000kg container
扫一扫添加微信