Substrate wetting agent

Evonik TEGO Wet KL 245 Substrate wetting and anti-crater additive

product description

TEGO Wet KL 245 works well with water-based and solvent-based formulations, especially plastic substrates, very compatible

Application Suggestions

Substrate wetting	5
Anti-crater effect	4
flow boost	3
low foam	0

Note: 0=Not applicable 5=Highly applicable

suitability

project	Typical data
waterborne	Suitable for
solvent type	Suitable for
Two-component type 100%	not applicable
radiation curing	Suitable for
clear paint	Suitable for
pigmented	Suitable for

Self-drying (transparent) paint

Primer / Primer	Suitable for
topcoat	Suitable for

Solubility

water	Suitable for
Ethanol	Suitable for
Tripropylene glycol diacrylate	Suitable for
Butyl acetate	Suitable for
Petroleum solvent	not applicable

Recommended dosage

Calculated according to the total formula based on the original product: 0.1-1.0%

Instructions for use

Can be added as original or pre-diluted

Recommended to be added in the second half

recipe suggestion

Low-foaming Substrate Wetting Alternative: TEGO Foamax 4100

chemical structure

polyether siloxane copolymer

technical parameter

project	Typical data
Exterior	Transparent liquid (the temperature will become turbid and thickened when the temperature is lower than 15℃, and the transparency and operability will be restored after heating)
Active ingredient	100%

storage security

When stored in the original unopened packaging, between -40 and +40°C, the shelf life of this product is at least 48 months from the date of manufacture.

Package

25kg plastic drum, 200kg plastic drum