Chemical name    Repair glue

  Uses    Suitable for bonding between sponge, foam, cloth, non-oil leather, wood, paper, thermal insulation cotton and other materials

  technical parameter  

Instructions 

1. Drain the water in the air compressor and pipeline, and remove impurities on the surface of the material;

2. The spray gun is about 10-50 cm away from the surface of the material, and the air pressure of the spray gun is adjusted to about 6-8 kg;

3. According to actual needs, spray a layer of glue on the surface of the material, and the sprayed glue is linear and granular;

4. When spraying glue, the spray gun should move as smoothly as possible, spray evenly, no shortage of glue, no glue accumulation, and the glue layer should not be too thick or too thin;

5. After spraying, let it dry for 1-5 minutes (the drying time varies reasonably according to the room temperature, humidity and material);

6. When bonding, first glue from the surrounding edges, and slowly press to the middle; the effect of appropriate pressure is better, and the pressure should be applied evenly, and there is no special requirement for the specific pressure.

  Precautions  

1. Because it is an organic solvent-based binder, be sure to pay attention to the fire source.

2. Store in a ventilated and dry place, avoid direct sunlight, and store at room temperature.

3. Wear safety glasses, labor protection work clothes, and gloves that can prevent the penetration of organic solvents and chemicals when working. When it sticks to the skin, immediately wipe off the material in contact with the skin with a cloth, and then wash the skin thoroughly with soap and water. .

  Package  

    Net weight 12kg/plastic bucket

data foundation

All data stated in the product data sheet were obtained in laboratory tests. Actual measurements may vary due to circumstances beyond our control.

  important  

For information and advice on transportation, handling, storage and chemical handling, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety-related data.

  Legal Notices  

When the product is correctly stored, handled and constructed under normal conditions, the information provided by Haoyi New Materials and the construction and treatment suggestions given according to the actual situation are based on the good knowledge and experience of Haoyi New Materials. confidence. In practical applications, due to the differences in the materials, substrates and actual site conditions used, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Materials Co. FITNESS FOR A PARTICULAR PURPOSE MAKES NO WARRANTY AND ASSUMES ANY LIABILITY. The user of the product should test the suitability of the product for its application and purpose. Haoyi New Material Co., Ltd. reserves the right to change the nature of its products. The third party's right to use should be respected. All orders are subject to the current sales and shipping terms. Users should refer to the latest version of the relevant product manuals, which Haoyi New Materials Company can provide according to their needs.