Product Description
A solvent-free, environmentally friendly, two-component polyurethane transparent putty, 100% solid in construction, strong adhesion, high transparency, fast curing at low temperature, easy to scrape and sand.
designed usage
Used for repairing surface defects of auto parts, general industrial parts and other products
Product Features
● good adhesion
● good transparency
● Fast curing at low temperature
● 100% solid content, no need to dilute, fully comply with national environmental protection regulations
● Odorless improves work environment while reducing fire hazards
Typical product parameters
project |
transparent putty |
Transparent putty curing agent |
color |
Colorless to light yellow transparent |
Colorless to light yellow transparent |
density |
1.11±0.1g/cm3(23℃) |
1.13±0.1g/cm3(23℃) |
solid content |
99%±1% |
99%±1% |
Supply viscosity |
1000-10000 mPa.s (23℃, Brookfield viscometer, 21# rotor speed 6rpm) |
Use a mix ratio |
weight ratio |
Xianbangcai S1000H transparent putty C (main agent) |
100 |
Fiberbond Color S1000H Transparent Putty C (hardener) |
67 |
The main agent of putty should be fully stirred before use, and it should be used in strict accordance with the ratio of main agent/curing agent.
Use environment
Use ambient temperature |
23±2℃ |
Use ambient humidity |
50-70% |
This product is relatively sensitive to temperature and humidity and needs to be considered as appropriate.
Available time
5-10 minutes after mixing (23°C, 50% humidity) It is recommended to use it now, as the gel will solidify after a long time and cannot be used again.
Remember: This product is sensitive to moisture and alcohol solvents and should not be introduced into putty.
Construction method
This product can be used before or after primer spraying.
Before use, the carbon fiber substrate or primer needs to be fully sanded. It is recommended to use 240-400 grit sandpaper for sanding, and then fully dust. The main agent needs to be fully stirred before use, and it is required to strictly follow the above mixing ratio, and use a paint mixing knife to stir evenly. Use a putty scraper (refer to the putty scraper provided by Nippon Paint) for local scraping to repair defects. The specific construction needs to be adjusted according to the operation of the construction personnel and the mastery of the transparent putty.
Equipment cleaning
Immediately after the equipment is used, it needs to be cleaned and maintained in time to prevent the putty from being hard to clean after curing.
drying time
dry naturally
flash time |
5-10 minutes |
no stick time |
15-30 minutes |
Grindable time |
2-4 hours |
bake dry
flash time |
10-15 minutes @ room temperature |
drying time |
60℃X60min |
no stick time |
After cooling, the grinding time can be 20-30min |
putty polishing
Use 400-600 grit sandpaper for grinding, requiring no unpolished parts, no burrs, no flash, and no sandpaper marks. The overall blowing and dedusting requires no dust on the surface of the workpiece, and if there is dust accumulation in the local area, it needs to be blown again. The grooves and other parts need to be checked and wiped off with a clean cloth. Use a degreasing agent to wipe the surface, the surface is free of oil and dust, and then dry the surface of the workpiece.
Operation Precautions
• Emergency measures: If splashed into the eyes, rinse with plenty of water, and go to the hospital for examination if necessary.
• Disposal Note: Please dispose of in accordance with relevant laws on waste disposal and cleaning, or entrust a qualified waste disposal company to dispose of it.
• Other safety: This product is recommended only by relevant professionals in the automotive field in accordance with this manual and material safety data sheet.
• Precautions: Use according to the recommendations given on the packaging container. This product should not be used without consulting the Material Safety Data Sheet (SDS) provided by Nippon Paint (China) Co., Ltd.
The information and data of the above products are based on the results of laboratory operations, and the final results will also be affected by factors of use. Nippon Paint (China) Co., Ltd. has the final interpretation right.
扫一扫添加微信