Nippon Fiber State Color S1000H Clear C High Solid Polyurethane Clear Varnish Water Resistant Weather Resistant Industrial Coatings - 广州昊毅新材料科技股份有限公司

Nippon products

Nippon Fiber State Color S1000H Clear C High Solid Polyurethane Clear Varnish Water Resistant Weather Resistant Industrial Coatings

Product Description              
   
A high-solid solvent-based, two-component polyurethane transparent varnish with high construction solid content, excellent appearance, excellent anti-aging and weather resistance

  designed usage               
For surface coating of auto parts, general industrial parts and other products

  Product Features  
● good adhesion
● Good weather resistance
● Excellent water and chemical resistance
● High solid content, no need to dilute, greatly reduce the amount of solvent, in line with national environmental protection regulations
● Low odor improves work environment while reducing fire hazards

Product Typical Parameters

project

clear primer coating

Clear primer hardener

color

Colorless to light yellow transparent

Colorless to light yellow transparent

density

1.03±0.1g/cm3(23℃)

1.07±0.1g/cm3(23℃)

immobilized

76%±3%

75%±3%

Theoretical VOC content

250g/L

270g/L

Supply viscosity

100-2000 mPa.s
(23℃, Brookfield viscometer, 21# rotor speed 6rpm)

 

  data after blending          

Service life after mixing

40-60 minutes (23°C, 50% humidity)

main material

two-component polyurethane

thinner

No dilution required

Theoretical construction VOC content

About 260g/L

flash time

8 min (23℃, 50% humidity)

 

 

Substrate processing             
     The surface of the substrate must be clean, dust-free, oil-free, pollution-free and moisture-free

 

construction              

   Mixing The original paint is fully stirred, and the original paint and curing agent are mixed in strict accordance with the ratio, and can be used after fully stirring.

Mixing ratio (weight ratio)

Main paint: curing agent = 100:67

Coating method

Working viscosity

Diluent ratio

Spraying equipment parameters

air spray

30-60s (coated - 4 cups)

No dilution required

1.2-2.0mm diameter

 

 

Recommended single-pass coating thickness

60-80 μm (dry film)

Recommended single pass pre-bake conditions

70℃/60min

Recommended spraying ambient temperature

15-35℃

Recommended spray environment humidity

50-70%

thinner

No dilution required

Equipment cleaning

Special solvent cleaning agent cleaning and maintenance

 

  Emergency measures                                    
      If splashed into the eyes, rinse with plenty of water, and go to the hospital for examination if necessary.

Abandonment attention .
Please dispose of in accordance with relevant laws on waste disposal and cleaning, or entrust a qualified waste disposal company to dispose of it.

other safety
This product is recommended only by relevant professionals in the industrial field in accordance with this manual and material safety data manual.

  Precautions                                  
This product should not be used without consulting the Material Safety Data Sheet (SDS) provided by Nippon Paint Co., Ltd.

storage and transportation

 

clear primer coating

Clear primer hardener

Storage and Shipping Conditions

Products should be stored in a cool, dry place away from heat sources and protected from freezing during storage and transportation.

The product should be stored in a cool, dry place away from heat and fire.

storage period

The shortest storage period at 5-35°C is 6 months, and re-testing is required after the expiration date.

The shortest storage period at 5-35°C is 6 months, and re-testing is required after the expiration date.

  • 咨询热线 020-82529612
    李经理 13925052655
    黄先生 13925052237
    微信二维码

    扫一扫添加微信